欢迎来到TradeChina

帮助

下载使用网展贸

江西数字外贸

购物车

询盘

消息

首页 > 产品 > 机械部件及定制加工 > 轴承 > 球轴承

123215.9 角接触球轴承 3201 ZZ/RS/OPEN

参考价格

采购数量 ()

最小起订量

支付订单

询盘

加入购物车

NINGBO LEXON BEARING CO., LTD

China - Ningbo

工贸一体

贸易能力

出口百分比

70-90%

最近的港口

Ningbo,Shanghai

接受的交付條款

FOB,CFR,CIF,EXW,Express

雇员

11-50人

接受的付款貨幣

USD,EUR,CNY

平均提前期

30 天）

证书

发起聊天发起会议

产品详情

产品属性产品描述

产品属性

行数

Double Row

精密等级

P0/P6

密封型

ZZ/RS/OPEN

孔径

12mm

型号

3201 ZZ/RS/OPEN

外径

32mm

产品描述

Angular contact ball bearing3201 ZZ/RS/OPEN

Dimension :12*32*15.9

Once ordered, please inform me which type you need? ZZ/RS/OPEN.... thanks.

Angular contact ball bearings mainly bear larger unidirectional axial loads. The greater the contact angle, the greater the load carrying capacity. The material of the cage is steel plate, brass or engineering plastic, and the forming method is stamping or turning. It is selected according to the bearing form or use conditions. Others have combined angular contact ball bearings, double row angular contact ball bearings and four-point contact ball bearings.
Angular contact ball bearings can bear both radial and axial loads. Can work at a higher speed. The greater the contact angle, the higher the axial load carrying capacity. High-precision and high-speed bearings usually take a contact angle of 15 degrees. Under the action of axial force, the contact angle will increase. Single-row angular contact ball bearings can only withstand axial loads in one direction, which will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or housing in one direction. If it is installed in pairs, the outer rings of a pair of bearings are opposed, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial forces can be avoided, and the shaft or housing can be restricted to the axial clearance range in both directions.
Angular contact ball bearings have a relative displacement on the horizontal axis of the raceway of the inner and outer rings, so they can bear radial load and axial load at the same time-combined load (single row angular contact ball bearings can only bear axial load in one direction, Therefore, it is generally used to install in pairs). The material of the cage is brass, synthetic resin, etc., and it is distinguished according to the bearing form and use conditions.

Type

7000C type (∝ = 15 °), 7000AC type (∝ = 25 °) and 7000B (∝ = 40 °) The outer ring of the bearing of this type of bearing is generally not separated, and can bear radial and axial Combined load and axial load in one direction. The ability to bear the axial load is determined by the contact angle. If the contact angle is large, the ability to bear the axial load is high. This type of bearing can limit the axial displacement of the shaft or housing in one direction.

l Single row: 78XX, 79XX, 70XX, 72XX, 73XX, 74XX
2 Miniature: 70X
3 Double row: 52XX, 53XX, 32XX, 33XX, LD57, LD58
4 Four-point contact: QJ2XX, QJ3XX