技术参数
1。载荷单位容量:200kg、500kg(可设定力值)
2。荷载元件精度:3/10000
3。测试精度:静态:±2% 动力:± 3%
4。电动缸和气缸装载:每个气缸由一个单独的电动比例阀控制。气缸要求为进口品牌,电动比例阀要求为进口品牌
5。位移行程:0-300mm,0-500mm可选
6。各种动作时间:0.01-30s可任意设定
7。试验速度:1-30次/分钟可任意设定
8。测试次数:可在0-999999次之间随时设置。断电记忆:具有停止/断电记忆和断点检测停止功能。停机或断电将自动保存测试结果。
9. Power off memory: with stop/power off memory and break point detection stop function.Stoppage or power outage will automatically save the test results.
10.停止模式:在测试次数处停止,并报警.
11.传感器:知名品牌传感器.
12.设备具有故障自诊断系统,便于检查和排除故障。基本框架采用高强度铝金属框架的模块化结构。底框采用立体结构,结构稳定
14。底座:高强度工业铝型材+国标45钢,厚度≥10mm,强力磁铁固定试样.
15.程序画面可从简体中文、繁体中文、英文中选择,并可在程序设置页面随意更改。计算机+力传感器+编码器形成力和位移闭环控制。计算机集成控制系统,数据采集多通道,控制多通道,可同时控制多个试验轴,可单独设定一个气缸或电机的动作,包括单台或多台往复试验,可设定一对协调动作,同向往复试验。每个通道都需要通过基准同步时间运行,以保证动作和数据处理的同步,不同的通道组来控制,如果一个通道的样本损坏,关联的通道组将同时停止,其余通道可以继续工作。它要求界面简单,功能齐全,响应速度快,操作方便。操作精确,故障率低。
15. The program screen can be selected from simplified Chinese, Traditional Chinese, English, and can be changed at will on the program setting page.
16. Computer + force sensor + encoder form force and displacement closed-loop control. Computer integrated control system, data acquisition multi-channel, control multiple channels, can control multiple test shafts at the same time, can set the action of a cylinder or motor separately, including single or multiple reciprocating tests, can set a pair of coordinated action, the same direction reciprocating test. Each channel needs to operate through the benchmark synchronization time to ensure the synchronization of action and data processing, different channel groups to control, if the sample of a channel is damaged, the associated group of channels will stop at the same time, the rest of the channels can continue to work. It requires simple interface, complete functions, high-speed response and easy operation. Precise operation, low failure rate.