Function keys on the front panel
1:mode to choose 3 working modes as below:
1)MDC to mix counter all bills total amount and total pieces .and also check the fake bills at the same time.
2)SDC to sort out different denomination bill,when the counted bill is difference fromthe fist counted bill ,and also check the fake bills at the same time.
3)CNT to count the bills freely without checking the fake bills.
2:OK to confirm and enter the selected mode
to exit from the correspoinding interface
to print the counting resuld while in MDC mode
3:START to start working or back to normal counting mode,
4 CFD to scan serial No or not(only scan USD and EURO serial No)
5:S/P TO choose 3 count speed
1)800pcs/min(in mode SDC and MDC)
2)1000pcs/min(in mode SDC and MDC)
3)1200pcs/min(in mode CNT)
6:M/A to to choose manal counting or Auto Counting
7:ADD: to turn on/off add counting
8:C to be clear zero
9:Batch to count in batch,press the key and the display will show as below
press the 10 numeric batch keys from 0 to 9 to set the batch number,And the batch function will be On.press the M/A key to clear the batch number and the batch area will show 0,and the batch function will be off.
10:Report :to show the counting details
11:CUR to choose difference currencies ,the currencies (difference software for difference currencies
12:SET: to enter into the seting menu of the machines.