消防救援套装

This suit is special clothes to protect fireman’s full body under emergency fire rescue situation. It features with flame resistance, wear resistance, fastness, sweat-absorbent breathability, lightweight, comfortable wearing, tensile strength and clear color and mark. It made of the following 3 layers 1. Outer layer is made of 98% mata aramid and 2% conductive fiber,2/1 right hand twill Color: orange(PANTONE 17-1464 TPX) 2.Moisture barrier layer is made of cotton fabric with PTFE membrane 3.Comfortable layer is made of grey cotton fabric 4.Accessories: 1)3M company 5cm wide yellow-silver-yellow FR reflective type 2)All hard accessories are smooth in surface without burrs and sharp edges 3)Sewing threads are made of aramid FR thread, they should not melt or shrink under （260±5）℃ thermal stability test 4)The front parts of jacket and pants use No.8 delrin zipper , orange color match with the outer material; orange color FR Velcro with high adhesice strength also match the outer materials 5.The fire fighting uniform is split type, while it also can be coverall type after connected with zipper; the zipper connector is flexible and adjustable. 6.There are aramid viscose covering the outer layer of shoulders, elbows, hips and knees to increase the abradability 7.There are velcros in the cuff of sleeves and pants, it is easy for fire fighters to wearing boots and gloves . 8.Two covered pockets on each side of jacket and radio pocket on the left breast