Characteristics:
The maximum production capacity of this machine can reach 260 capsules per minute. Standard and serial production: the interchangeability of manufacturing parts can reach above 99%; each spare part has its own regular code; while changing the mould, all the parts are fixed by the location hole with high precise; it's very efficient to change the moulds, easy to operate and clean the machine.
Main performance:
1. Improve the driving cams of all stations, from original outer cam pulled by spring to inner groove cam made of high-quality special material. This change, eliminating the disadvantages of easy fatigue and short service life for spring pulling method, makes the machine more wearable and stable.
2. In consideration of the medicine dust easy to enter the machine mould after long-time running, causing the mould rotary plate to be disassembled for cleaning, the innovation design of seal ring preventing dust from outside is developed and applied to this machine, which completely ensures the sealing in running process and eliminates the shortcoming of tedious maintenance.
3. This machine adds the inching control system, convenient for the human-oriented operation in manufacturing and cleaning process.
4. If lack of capsule, the liquid feeding will stop automatically.
Compared with the other machine models in same industry, our 260 machine has such advantages as below:
1. This liquid capsule filling machine improves the internal design of mould rotary plate and adopts original Japan linear bearing, which can ensure its precision and service life.
2. It employs the cam underneath design and adds the pressure atomization oil pump, which can keep the cam groove lubricant, reduce wear and prolong the service life of accessories.
3. The upper and lower moulds of this machine carry out one-way movement. With employing the imported double-lip PU seal ring, it has very good sealing performance.
4. It adopts computer control, stepless frequency control of motor speed and digital display to make the operation more simple and intuitive.
5. It's equipped with safety protection device for both operators and machine and auto-stop device for material lacking to make the machine run stably, safely and reliably, which is an ideal equipment for those pharmaceutical factories to produce hard capsules such as medicine or functional food.
6. This machine combines the mould blowing with sucking to ensure no dust in the mould hole and improve the rate of good finished capsules.
Main Technical Parameter of NJP-260 liquid capsule filling machine
Weight : 900kg
Dimensions : 1020×860×1970mm
Power : 5.75kw
Power supply : 3phase 4 wires AC 380V;50Hz
Maxi. Capacity : 260 capsules/m
Capsule specifications : 00#~5# and Safety Capsule A~E
Compressed air : 0.06m3/min 0.3Mpa
Filling precision : Liquid Above 300mg≤±3%
Water flow : 250L/h
Intake water diameter : 20mm
Discharge water diameter : 27mm
noise : ≤75dBA
Capsule feeding rate : ≥99.5%
![NJP-260 Full Automatic Pellet And Liquid Capsule Filling Machine来自中国供应商](/public/media/LazyImage_placeholder.09bec84d.svg)
![NJP-260 Full Automatic Pellet And Liquid Capsule Filling Machine来自中国供应商](/public/media/LazyImage_placeholder.09bec84d.svg)