Ship-mounted Screw Ship Unloader-ATXL400D

Capacity: 200 ~ 1000t/h (calculated according to cement bulk density)

Applicable ship type: 1000～70000 DWT

Horizontal swivel angle of horizontal arm: ±135°

Pitch angle of horizontal arm: 30° for lifting up and 30° for probing down

Swing angle of vertical arm: 30° for inner swing and 40° for outer swing

Energy consumption: ≤0.8kwh/t

Noise: ≤ 80dB

Dust emission concentration: ≤ 10 mg/m³

ATXL-D screw ship unloader is installed on barge and does not occupy wharf berth.Depending on the two-way horizontal rotation of the rotary tower, the tilting amplitude of the horizontal beam on the tower and the back-and-forth swing of the vertical arm, the feeder can realize three-dimensional movement to track the position of the material to take it, and then the material is lifted to the horizontal screw by the vertical screw machine, and then the material in the ship cabin is automatically unloaded to the shore by the discharging device.

   The unloading of materials is transported in a closed pipeline, with no dust pollution in the whole process, low noise and easy operation.  It is suitable for unloading of powder bulk materials such as cement, GGBS, fly ash, chemical fertilizer, grain, etc.