Product specification: Volume 400㎡ 450㎡
Type:Sintering equipment
Product introduction:
Sintering machine split trolley is the main operating part of sintering machine. Its main function is to form a rotating chain between the sinter head and tail wheels. It accepts the sinter mixed materials in the upper horizontal section and returns to the first wheel after being heated, ignited, cooled and turned over, forming a transmission cycle to achieve the purpose of sinter materials.
Product features:
The sintering machine split type car wheel by sets of car body car body sealing device article Bi block plate wear plate heat insulation pad, etc with a wheel of car body car body bolting together, between the upper pallet box and article Bi arched stamped with the four steps of insulation pad, machine equipped with four wear plate on both ends of the bodywork, a symmetric fixed two sealing device on both ends of the lower part of body, make the car of the same size the weight about 5% ~ 10%, reduce equipment investment and project cost.The total air leakage rate of sintering machine is reduced by about 5%~10%, which can increase the production of sintering machine by about 5%.The end impact wear of the trolley in the return lane is basically eliminated and the service life of the trolley is extended.Reduce production maintenance costs.
Product application:
Sinter trolley is the main operating part of sinter machine. Its main function is to form a rotating chain between the sinter head and tail wheels, accept the sinter mixture at the upper horizontal section, and return to the head wheel after being heated, ignited, cooled, and turned over, so as to form a transmission cycle to achieve the purpose of sinter materials.