钢胶叶重量1/4盎司

Steel Adhesive Wheel Weights

Model:FSF03

Weight Size: 1/4 oz x 12; 3 oz/strip

Surface: Grey Plastic Coated

Tape: White Tape

Thickness: 4mm

Package: 48 strips/box; 4 boxes/case

Instruction:

1.Preparatory work

Rotate the tyre and determine the wheel imbalance both planes. Ensure in the weight,

rim and that ambient temperature have at least 15。C. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. Be sure to test the cleaning agent on a small area to ensure will not damage the wheel's it finish.

2.Adjusting the adhesive weight to the rim contour

Adjust the adhesive weight with the protective foil to the rim radius. The radius of

the weight body and the rim must run at least paralle to each other. It is even better, if the radius of the weight body is smaller than the rim radius.

3. Removing the protective foil

After having adjusted the weight to the rim redius, peel off the protective backing

without touching the adhesive.

4. Assembling the weight

Now press the weight to the rim from the middle towards the outer edges. The

pressure should be at least 100kPa.