Weight Size: 1 OZ x 6; 6 OZ/strip
Surface: Black Plastic Coated
Tape: US White Tape
Thickness: 6mm
Package: 32 strips/box ; 4 boxes/case
Instruction:
1. Preparatory work
Rotate the tyre and determine the wheel imbalance both planes. Ensure in the weight, rim and that ambient temperature have at least 15。C. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. Be sure to test the cleaning agent on a small area to ensure will not damage the wheel's it finish.
2.Adjusting the adhesive weight to the rim contour
Adjust the adhesive weight with the protective foil to the rim radius. The radius of the weight body and the rim must run at least paralle to each other. It is even better, if the radius of the weight body is smaller than the rim radius.
3. Removing the protective foil
After having adjusted the weight to the rim redius, peel off the protective backing without touching the adhesive.
4. Assembling the weight
Now press the wieght to the rim from the middle towards the outer edges. The pressure should be at least 100kPa.