JISCO SCS锌铝镁合金镀层板带是以冷轧钢板为基材,双面热浸镀锌-铝-镁合金镀层的镀层钢板。镀层成分质量百分比为Zn-11%AL-3%Mg-0.2%Si-Ni-RE。其显微组织由Zn、Al和Zn2Mg的致密三元共晶组织构成,不但具有铝的物理保护性能、锌的牺牲腐蚀电化学保护特性,而且Mg的添加使耐腐蚀性能更加优越,Si、Ni、稀土的添加,更加优化镀层的附着性和耐蚀性能。
JISCO SCS锌铝镁合金镀层板带耐蚀性优良,275g/m2镀层质量好于市场上所要求苛刻使用环境下的700g镀锌表面的耐蚀性,且具有自修复、硬度高耐划伤加工性好等优点。
The JISCO SCS zinc-aluminum-magnesium alloy coating strip is a coating steel plate with cold-rolled steel plate as the base material and double-sided hot dip galvanic-aluminum-magnesium alloy.The percentage of coating composition mass was Zn-11%Al-3%Mg-0.2%Si-Ni-RE.Its microstructure consists of the dense ternary eutectic tissues of Zn, Al, and Zn2Mg.It not only has the physical protection properties of aluminum, the sacrificial corrosion electrochemical protection properties of zinc, and the addition of Mg makes the corrosion resistance more superior. The addition of Si, Ni and rare earths will further optimize the adhesion and corrosion resistance of the coatings.
The JISCO SCS zinc-aluminum magnesium alloy plating plate has excellent corrosion resistance, and the 275g/m2 coating quality is better than the corrosion resistance of the 700g galvanized surface under harsh conditions required by the market, and has self-repair at the cut-end surface, high hardness, and good scratch resistance.
产品特点:
Features:
1、超耐蚀:耐蚀性优良,是热浸镀锌钢板的10-20倍,好于市场上所要求苛刻使用环境下的700g镀锌表面的耐蚀性。
1.Super Corrosion Resistant: The Zinc-Aluminum-Magnesium alloy-coated steel plate has excellent corrosion resistance,which is 10-20 times of the conventional hot dipped galvanized steel plate, and better than the corrosion resistance of 700g galvanized sheet used in the harsh environment.
2、自修复:镀层成分对切割面的腐蚀有抑制效果。
2.Self-Recovery: The composition of the coating effective in suppressing the development of corrosion at the cut-end surface.
3、长寿命:由于超耐蚀能力和切割断面的耐腐蚀自我愈合功效,般情况下,产品构件服役寿命可以达到30年以上。
3.Long Service Life: Since the super corrosion-resistance and the corrosion-resistance recovery to the cut-end surfaces and at welded sections,under normal condition,the service life will be more than 30 years.
4、易加工:良好冲压、折弯、焊接、耐损伤性。
4.Easy processing: Good stamping,bending,welding,and excellent scratch resistance.