氢燃料电池堆-水冷80kW

2-Initial polarization curve under standard operating conditions

3-Shipping requirements
Before transportation, the stack should be wrapped with plastic film, and the sharp corners of the case should be equipped with shock-absorbing foam. This product should be placed in a wooden box with a frame, surrounded by shock-absorbing foam protection. The strength of the frame base should support the stack as a whole. The product is recommended to be stored flat. During transportation, no items shall be stacked on top of the wooden box. During transportation, there should be no violent vibration, impact, etc. The transportation insurance price should be consistent with the equipment price.
NOTE: Use proper safety and lifting equipment when installing or moving the stack. Under no circumstances should the stack be carried by its terminals or gas pipes, otherwise the stack will be damaged.

4-Storage requirements
If the SMP03 series stacks are not used for a long time, the coolant in the cooling circuit should be drained as much as possible, and stored in a dust-free and volatile gas-free indoor environment. Before storing the stack system, all air and liquid connections should be closed. Cooling inlet and outlet, air inlet and outlet, and hydrogen inlet and outlet should be well sealed and protected against dust to prevent volatile pollutants or dust from entering the system.

1) The storage temperature of the product is – 40°C~60°C
2) When the product is stored for a long time, it is expected that the performance of the stack will decrease at the next startup.